SDIO - SD Card Interface (*)
SDIO is the SD host/eMMC interface on the BeagleY-AI. SD host signals are normally used for the microSD slot.
(*) - SDIO is not available on the 40 Pin Header on BeagleY-AI.
BeagleY-AI Pinout
Legend
Orientate your BeagleY-AI with the GPIO on the right and the HDMI port(s) on the left.
- GPIO (General Purpose IO)
- SPI (Serial Peripheral Interface)
- I2C (Inter-integrated Circuit)
- UART (Universal Asynchronous Receiver/Transmitter)
- PCM (Pulse Code Modulation)
- Ground
- 5v (Power)
- 3.3v (Power)
(*) Denotes pins that differ in functionality on BeagleY-AI as compared to Raspberry Pi 4/5
