BeagleY-AI Pinout

Legend

Orientate your BeagleY-AI with the GPIO on the right and the HDMI port(s) on the left.

(*) Denotes pins that differ in functionality on BeagleY-AI as compared to Raspberry Pi 4/5

Servo PWM Pi

The Servo PWM Pi is a 16-channel, 12-bit PWM controller for the Raspberry Pi and other compatible single-board computers; suitable for driving LEDs and radio control servos. The board is based around PCA9685 PWM I2C LED controller IC from NXT and can drive each of the 16 outputs with a 12-bit (4096 steps) duty cycle from 0% to 100%.

The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.

Python, C, C++, Node.js and Windows 10 IOT libraries are available on GitHub.

Details

  • Made by AB Electronics UK
  • pHAT form-factor
  • Needs 5v and 3v3 power
  • Uses 3 GPIO pins
  • Communication over I2C
  • 0x40: PCA9685 (Alt: 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F)
  • More Information
  • GitHub Repository
  • Schematic
  • Buy Now
Servo PWM Pi